#architecture

Ukraine, Lviv, Lviv O & B Theatre

• Model: Artistic

• Size: 864 X 672 (0.58 MP)

• Used settings:

  • Prompt: Korean architecture. In Korean architecture, buildings are structured vertically and horizontally. A construction usually rises from a stone subfoundation to a curved roof covered with tiles, held by a console structure and supported on posts; walls are made of earth (adobe) or are sometimes totally composed of movable wooden doors. Architecture is built according to the kan unit, the distance between two posts (about 3.7 meters), and is designed so that there is always a transitional space between the "inside" and the "outside.". The construction of Buddhist temples was undertaken after Buddhism was introduced in Korean Goguryeo in 372 by way of northern China. A series of excavations in 1936-1938 unearthed the sites of several major temples near Pyongyang, including those in Cheongam-ri, Wono-ri and Sango-ri. The excavations disclosed that the temples were built in a Goguryeo style known as "three Halls-one Pagoda," with each hall in the east, west and north, and an entrance gate in the south. In most cases, the central pagodas had an octagonal plan. Palace buildings appear to have been arranged in this way as well. The earliest stone pagoda of the Mireuksa Temple in Iksan.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Lviv, Lviv O & B Theatre

• Model: Artistic

• Size: 864 X 672 (0.58 MP)

• Used settings:

  • Prompt: Islamic architecture comprises the architectural styles of buildings associated with Islam. It encompasses both secular and religious styles from the early history of Islam to the present day. The Islamic world encompasses a wide geographic area historically ranging from western Africa and Europe to eastern Asia. Certain commonalities are shared by Islamic architectural styles across all these regions, but over time different regions developed their own styles according to local materials and techniques, local dynasties and patrons, different regional centers of artistic production, and sometimes different religious affiliations. New architectural elements like minarets, muqarnas, and multifoil arches were invented. Common or important types of buildings in Islamic architecture include mosques, madrasas, tombs, palaces, hammams (public baths), Sufi hospices (e.g. khanqahs or zawiyas), fountains and sabils, commercial buildings (e.g. caravanserais and bazaars), and military fortifications.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Lviv, Lviv O & B Theatre

• Model: Artistic

• Size: 864 X 672 (0.58 MP)

• Used settings:

  • Prompt: Gothic architecture is an architectural style that was prevalent in Europe from the late 12th to the 16th century, during the High and Late Middle Ages, surviving into the 17th and 18th centuries in some areas. The defining design element of Gothic architecture is the pointed or ogival arch. The use of the pointed arch in turn led to the development of the pointed rib vault and flying buttresses, combined with elaborate tracery and stained glass windows.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Lviv, Lviv O & B Theatre

• Model: Artistic

• Size: 864 X 672 (0.58 MP)

• Used settings:

  • Prompt: Hanging Gardens of Babylon. They were described as a remarkable feat of engineering with an ascending series of tiered gardens containing a wide variety of trees, shrubs, and vines, resembling a large green mountain constructed of mud bricks. It was said to have been built in the ancient city of Babylon, near present-day Hillah, Babil province, in Iraq. The Hanging Gardens' name is derived from the Greek word κρεμαστός (kremastós, lit. 'overhanging'), which has a broader meaning than the modern English word "hanging" and refers to trees being planted on a raised structure such as a terrace. In this palace he erected very high walls, supported by stone pillars; and by planting what was called a pensile paradise, and replenishing it with all sorts of trees, he rendered the prospect an exact resemblance of a mountainous country. This he did to gratify his queen, because she had been brought up in Media, and was fond of a mountainous situation.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Lviv, Lviv O & B Theatre

• Model: Artistic

• Size: 864 X 672 (0.58 MP)

• Used settings:

  • Prompt: Khmer architecture. Angkor Wat. Sambor Prei Kuk. Pre Rup. Banteay Srei. Bayon. Bakong. Lolei. Preah Ko. Bakheng. Koh Ker. Pre Rup. Phimeanakas. East Mebon. Banteay Srei. Khleang. Ta Keo. Baphuon. Angkor Wat. Banteay Samre. Thommanon. Phimai. Bayon.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Lviv, Lviv O & B Theatre

• Model: Artistic

• Size: 864 X 672 (0.58 MP)

• Used settings:

  • Prompt: Ishtar Gate. After the glaze firing, the bricks were assembled, leaving narrow horizontal seams from one to six millimeters. The seams were then sealed with a naturally occurring black viscous substance called bitumen, like modern asphalt. The Ishtar Gate is only one small part of the design of ancient Babylon that also included the palace, temples, an inner fortress, walls, gardens, other gates, and the Processional Way. The lavish city was decorated with over 15 million baked bricks, according to estimates. The main gate led to the Southern Citadel, the gate itself seeming to be a part of Imgur-Bel and Nimitti-Bel, two of the most prominent defensive walls of Babylon. There were three primary entrances to the Ishtar Gate: the central entrance which contained the double gate structure (two sets of double doors, for a fourfold door structure), and doors flanking the main entrance to the left and right, both containing the signature double door structure. The walls were finished in glazed bricks mostly in blue, with animals and deities in low relief at intervals, these were also made up of bricks that are molded and colored differently.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Indian culture

• Model: Fusion*

• Size: 896 X 704 (0.63 MP)

• Used settings:

  • Prompt: Mahashivratri images lord Shiva and Parvati
  • Face enhance: No
  • Upscale & Enhance: 0
  • Aspect Ratio: landscape

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Magnificent stallion, centered, symmetry, painted, intricate, volumetric lighting, beautiful, rich deep colors masterpiece, sharp focus, ultra detailed, in the style of dan mumford and marc simonetti, astrophotography, trending on artstation, sharp focus, studio photo, intricate details, highly detailed, by greg rutkowski
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A coral reef is an underwater ecosystem characterized by reef-building corals. Reefs are formed of colonies of coral polyps held together by calcium carbonate. Most coral reefs are built from stony corals, whose polyps cluster in groups. Coral belongs to the class Anthozoa in the animal phylum Cnidaria, which includes sea anemones and jellyfish. Unlike sea anemones, corals secrete hard carbonate exoskeletons that support and protect the coral. Most reefs grow best in warm, shallow, clear, sunny and agitated water. Coral reefs first appeared 485 million years ago, at the dawn of the Early Ordovician, displacing the microbial and sponge reefs of the Cambrian.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Mars suits used in conjunction with other surface elements on Mars (artwork)
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: This was followed by landings by Apollo 12 (LM-6 Intrepid) and Apollo 14 (LM-8 Antares). In April 1970, the Apollo 13 LM-7 Aquarius played an unexpected role in saving the lives of the three astronauts after an oxygen tank in the service module ruptured, disabling the CSM. Aquarius served as a "lifeboat" for the astronauts during their return to Earth. Its descent stage engine[16] was used to replace the crippled CSM Service Propulsion System engine, and its batteries supplied power for the trip home and recharged the Command Module's batteries critical for reentry. The astronauts splashed down safely on April 17, 1970. The LM's systems, designed to support two astronauts for 45 hours (including twice depressurization and repressurization causing loss of oxygen supply), actually stretched to support three astronauts for 90 hours (without depressurization and repressurization and loss of oxygen supply).
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: At the microwave frequencies used in many parabolic antennas, waveguide is required to conduct the microwaves between the feed antenna and transmitter or receiver. Because of the high cost of waveguide runs, in many parabolic antennas the RF front end electronics of the receiver is located at the feed antenna, and the received signal is converted to a lower intermediate frequency (IF) so it can be conducted to the receiver through cheaper coaxial cable. This is called a low-noise block downconverter. Similarly, in transmitting dishes, the microwave transmitter may be located at the feed point. An advantage of parabolic antennas is that most of the structure of the antenna (all of it except the feed antenna) is nonresonant, so it can function over a wide range of frequencies (i.e. a wide bandwidth). All that is necessary to change the frequency of operation is to replace the feed antenna with one that operates at the desired frequency. Some parabolic antennas transmit or receive at multiple frequencies by having several feed antennas mounted at the focal point, close together.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Googie architecture

• Model: Artistic

• Size: 672 X 864 (0.58 MP)

• Used settings:

  • Prompt: Googie architecture
  • Using base image: Yes (Effect strength - 60%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The radiative zone is the thickest layer of the sun, at 0.45 solar radii. From the core out to about 0.7 solar radii, thermal radiation is the primary means of energy transfer.[67] The temperature drops from approximately 7 million to 2 million Kelvin with increasing distance from the core.[55] This temperature gradient is less than the value of the adiabatic lapse rate and hence cannot drive convection, which explains why the transfer of energy through this zone is by radiation instead of thermal convection.[55] Ions of hydrogen and helium emit photons, which travel only a brief distance before being reabsorbed by other ions.[67] The density drops a hundredfold (from 20 g/cm3 to 0.2 g/cm3) between 0.25 solar radii and 0.7 radii, the top of the radiative zone.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Several new types of non-volatile RAM, which preserve data while powered down, are under development. The technologies used include carbon nanotubes and approaches utilizing Tunnel magnetoresistance. Amongst the 1st generation MRAM, a 128 kbit (128 × 210 bytes) chip was manufactured with 0.18 µm technology in the summer of 2003.[citation needed] In June 2004, Infineon Technologies unveiled a 16 MB (16 × 220 bytes) prototype again based on 0.18 µm technology. There are two 2nd generation techniques currently in development: thermal-assisted switching (TAS)[29] which is being developed by Crocus Technology, and spin-transfer torque (STT) on which Crocus, Hynix, IBM, and several other companies are working.[30] Nantero built a functioning carbon nanotube memory prototype 10 GB (10 × 230 bytes) array in 2004. Whether some of these technologies can eventually take significant market share from either DRAM, SRAM, or flash-memory technology, however, remains to be seen.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The Parker Solar Probe is the first spacecraft to fly into the low solar corona. It will assess the structure and dynamics of the Sun's coronal plasma and magnetic field, the energy flow that heats the solar corona and impels the solar wind, and the mechanisms that accelerate energetic particles. The spacecraft's systems are protected from the extreme heat and radiation near the Sun by a solar shield. Incident solar radiation at perihelion is approximately 650 kW/m2, or 475 times the intensity at Earth orbit.[1][30]: 31  The solar shield is hexagonal, mounted on the Sun-facing side of the spacecraft, 2.3 m (7 ft 7 in) in diameter,[31] 11.4 cm (4.5 in) thick, and is made of two panels of reinforced carbon–carbon composite with a lightweight 4.5-inch-thick carbon foam core,[32] which is designed to withstand temperatures outside the spacecraft of about 1,370 °C (2,500 °F).[1] The shield weighs only 73 kilograms (160 lb) and keeps the spacecraft's instruments at 29 °C (85 °F).
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: An MPLM is a large cylinder equipped with a common berthing mechanism at one end, and grapple fixtures to allow the Canadarm-2 to move it from the shuttle bay to a berthing port on the US Orbital Segment of the ISS.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Each ISPR provides 1.571 m3 (55.5 ft3) of internal volume being about 2 m (79.3 in) high, 1.05 m (41.3 in) wide, and 85.9 cm (33.8 in) deep. The rack weighs 104 kg (230 lb) and can accommodate an additional 700 kg (1540 lb) of payload equipment.[1] The rack has internal mounting provisions to allow attachment of secondary structure. The ISPRs will be outfitted with a thin center post to accommodate sub-rack-sized payloads, such as the 483 mm (19-inch rack) Spacelab Standard Interface Rack (SIR) Drawer or the Space Shuttle Middeck Locker. Utility pass-through ports are located on each side to allow cables to be run between Racks. Module attachment points are provided at the top of the rack and via pivot points at the bottom. The pivot points support installation and maintenance. Tracks on the exterior front posts allow mounting of payload equipment and laptop computers. Additional adapters on the ISPRs are provided for ground handling.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The tower foundation consists of a circular reinforced concrete slab with a thickness of 1 meter and a diameter of 13.40 meters . The foundation is laid in the altitude of 1004.75 meters. The load-bearing element of the structure consists of two concentric reinforced concrete rollers with inner diameters of 4.4 and 12.5 meters (and a wall thicknesses of 30 centimeters); the narrower is 42.4 meters high, the wider (external) is 22.5 meters high. On the tubes the individual floors are suspended on a steel structure, starting with the second floor. The columns were manufactured by Průmstav Pardubice. The supporting steel structures for the floors and for the tower structure were manufactured in the Mostárna plant in the then state-owned company Vítkovice Iron Works of Klement Gottwald. A steel shell with a length of 44 meters of a variable diameter (from 10.50 meters to 1.62 meters) is attached to the inner column The laminate support roller (diameter of 1.90 meters and a wall thickness of 16 to 12 millimeters) attached to it, originally had a length of 17.52 meters which was extended another 3 meters during the 1997 reconstruction.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: LES-4, along with LES-3, OV2-3, and OSCAR 4 was launched on the third Titan IIIC test flight on 22 December 1965 at 14:00:01 UT from Cape Canaveral LC41 just one second behind schedule. From an initial parking orbit of 194 kilometres, the Titan's Transtage boosted into a transfer orbit pending a final burn to circularize its orbit. However, this final burn, scheduled for T+6:03:04 after liftoff, never occurred due to a leaking valve in the booster's attitude control system. LES-3, LES-4, and OSCAR 4 were released from the Transtage, albeit much later than intended; OV2-3 remained attached and did not operate.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0