#ukraine

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Several new types of non-volatile RAM, which preserve data while powered down, are under development. The technologies used include carbon nanotubes and approaches utilizing Tunnel magnetoresistance. Amongst the 1st generation MRAM, a 128 kbit (128 × 210 bytes) chip was manufactured with 0.18 µm technology in the summer of 2003.[citation needed] In June 2004, Infineon Technologies unveiled a 16 MB (16 × 220 bytes) prototype again based on 0.18 µm technology. There are two 2nd generation techniques currently in development: thermal-assisted switching (TAS)[29] which is being developed by Crocus Technology, and spin-transfer torque (STT) on which Crocus, Hynix, IBM, and several other companies are working.[30] Nantero built a functioning carbon nanotube memory prototype 10 GB (10 × 230 bytes) array in 2004. Whether some of these technologies can eventually take significant market share from either DRAM, SRAM, or flash-memory technology, however, remains to be seen.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The two widely used forms of modern RAM are static RAM (SRAM) and dynamic RAM (DRAM). In SRAM, a bit of data is stored using the state of a six-transistor memory cell, typically using six MOSFETs. This form of RAM is more expensive to produce, but is generally faster and requires less dynamic power than DRAM. In modern computers, SRAM is often used as cache memory for the CPU. DRAM stores a bit of data using a transistor and capacitor pair (typically a MOSFET and MOS capacitor, respectively),[27] which together comprise a DRAM cell. The capacitor holds a high or low charge (1 or 0, respectively), and the transistor acts as a switch that lets the control circuitry on the chip read the capacitor's state of charge or change it. As this form of memory is less expensive to produce than static RAM, it is the predominant form of computer memory used in modern computers.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: An MPLM is a large cylinder equipped with a common berthing mechanism at one end, and grapple fixtures to allow the Canadarm-2 to move it from the shuttle bay to a berthing port on the US Orbital Segment of the ISS.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Each ISPR provides 1.571 m3 (55.5 ft3) of internal volume being about 2 m (79.3 in) high, 1.05 m (41.3 in) wide, and 85.9 cm (33.8 in) deep. The rack weighs 104 kg (230 lb) and can accommodate an additional 700 kg (1540 lb) of payload equipment.[1] The rack has internal mounting provisions to allow attachment of secondary structure. The ISPRs will be outfitted with a thin center post to accommodate sub-rack-sized payloads, such as the 483 mm (19-inch rack) Spacelab Standard Interface Rack (SIR) Drawer or the Space Shuttle Middeck Locker. Utility pass-through ports are located on each side to allow cables to be run between Racks. Module attachment points are provided at the top of the rack and via pivot points at the bottom. The pivot points support installation and maintenance. Tracks on the exterior front posts allow mounting of payload equipment and laptop computers. Additional adapters on the ISPRs are provided for ground handling.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: he HTV is about 9.8 metres (32 ft) long (including maneuvering thrusters at one end) and 4.4 metres (14 ft) in diameter. Total mass when empty is 10,500 kilograms (23,100 lb), with a maximum total payload of 6,000 kilograms (13,000 lb), for a maximum launch weight of 16,500 kilograms (36,400 lb).[2] The HTV is comparable in function to the Russian Progress, ESA ATV, commercial Cargo Dragon 1, and Cargo Dragon 2 of SpaceX. Plus the Cygnus spacecraft, all of which bring supplies to the ISS. Like the ATV, the HTV carries more than twice the payload of the Progress, but is launched less than half as often. Unlike Progress spacecraft, Cargo Dragon 2's and ATV's which use the docking ports automatically, HTVs and American Dragon 1 approach the ISS in stages, and once they reach their closest parking orbit to the ISS, crew grapple them using the robotic arm Canadarm2 and berth them to an open berthing port on the Harmony module.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The library was designed by architects Reima and Raili Pietilä in the organic architecture style. The design contest was held in 1978, with the Pietiläs' proposal Soidinmenot ('Lek mating') winning by unanimous decision. Inspired by the architects' visit to Ireland during the initial ideas phase, their design language was influenced by Celtic patterns, animal shapes and glacial formations. The building exterior is made of granite, wiborgite, copper and glass.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The tower foundation consists of a circular reinforced concrete slab with a thickness of 1 meter and a diameter of 13.40 meters . The foundation is laid in the altitude of 1004.75 meters. The load-bearing element of the structure consists of two concentric reinforced concrete rollers with inner diameters of 4.4 and 12.5 meters (and a wall thicknesses of 30 centimeters); the narrower is 42.4 meters high, the wider (external) is 22.5 meters high. On the tubes the individual floors are suspended on a steel structure, starting with the second floor. The columns were manufactured by Průmstav Pardubice. The supporting steel structures for the floors and for the tower structure were manufactured in the Mostárna plant in the then state-owned company Vítkovice Iron Works of Klement Gottwald. A steel shell with a length of 44 meters of a variable diameter (from 10.50 meters to 1.62 meters) is attached to the inner column The laminate support roller (diameter of 1.90 meters and a wall thickness of 16 to 12 millimeters) attached to it, originally had a length of 17.52 meters which was extended another 3 meters during the 1997 reconstruction.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Construction of the church itself started shortly after 1200, and it was consecrated in 1312, when part had become usable. From 1324 onwards the flying buttresses and revised choir structure acquired Brabantine Gothic characteristics, distinct from French Gothic. After the city fire of 1342, the Master Mason Jean d'Oisy managed repairs and continued this second phase, which by the time of his death in 1375 formed the prototype for that High Gothic style. His successors finished the vaults of the nave by 1437, and those of the choir by 1451. During the final phase of 1452–1520, the tower was erected, financed by pilgrims and later by its proprietor, the city. Designed to reach 600 Mechlinian feet or about 167 metres, higher than any church tower would ever attain (Ulm Minster has measured 161 metres since the 19th century), the very heavy St. Rumbold's tower was built on what had once been wetlands, though with foundations only three metres deep its site appears to have been well-chosen. After a few years, in 1454, its chief architect Andries I Keldermans constructed the Saint Livinus' Monster Tower (or St.-Lievensmonstertoren as it is called in Dutch) in Zierikzee.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The plan consists of a nave with four side-aisles, crossed by a transept and then followed by choir and apse. The height of the nave is about 45 metres (148 ft), the highest Gothic vaults of a complete church (less than the 48 metres (157 ft) of Beauvais Cathedral, which was never completed). The roof is open to tourists (for a fee), which allows many a close-up view of some spectacular sculpture that would otherwise be unappreciated. The roof of the cathedral is renowned for the forest of openwork pinnacles and spires, set upon delicate flying buttresses. The cathedral's five broad naves, divided by 40 pillars, are reflected in the hierarchic openings of the façade. Even the transepts have aisles. The nave columns are 24.5 metres (80 ft) high, and the apsidal windows are 20.7 by 8.5 metres (68 by 28 ft). The huge building is of brick construction, faced with marble from the quarries which Gian Galeazzo Visconti donated in perpetuity to the cathedral chapter. Its maintenance and repairs are very complicated.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The Iron Crown is so called because it contains a one-centimetre-wide band within it, that is said to have been beaten out of a nail used at the crucifixion of Jesus. The outer circlet of the crown is made of six segments of beaten gold, partly enameled, joined together by hinges. It is set with 22 gemstones that stand out in relief, in the form of crosses and flowers. Its small size and hinged construction have suggested to some that it was originally a large armlet or, most probably, a votive crown. According to other opinions, the small size is due to a readjustment after the loss of two segments, as described in historical documents.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Quartz is a hard, crystalline mineral composed of silica (silicon dioxide). The atoms are linked in a continuous framework of SiO4 silicon–oxygen tetrahedra, with each oxygen being shared between two tetrahedra, giving an overall chemical formula of SiO2. Quartz is the second most abundant mineral in Earth's continental crust, behind feldspar. Quartz exists in two forms, the normal α-quartz and the high-temperature β-quartz, both of which are chiral. The transformation from α-quartz to β-quartz takes place abruptly at 573 °C (846 K; 1,063 °F). Since the transformation is accompanied by a significant change in volume, it can easily induce microfracturing of ceramics or rocks passing through this temperature threshold.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A microwave oven generally consists of: a high-voltage DC power source, either: a large high voltage transformer with a voltage doubler (a high-voltage capacitor and a diode) an electronic power converter usually based around an inverter. a cavity magnetron, which converts the high-voltage DC electric energy to microwave radiation a magnetron control circuit (usually with a microcontroller) a short waveguide (to couple microwave power from the magnetron into the cooking chamber) a turntable and/or metal wave guide stirring fan a control panel
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The modern uses of radar are highly diverse, including air and terrestrial traffic control, radar astronomy, air-defense systems, anti-missile systems, marine radars to locate landmarks and other ships, aircraft anti-collision systems, ocean surveillance systems, outer space surveillance and rendezvous systems, meteorological precipitation monitoring, altimetry and flight control systems, guided missile target locating systems, self-driving cars, and ground-penetrating radar for geological observations. Modern high tech radar systems use digital signal processing and machine learning and are capable of extracting useful information from very high noise levels.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Unlike optical telescopes which possess simple aluminized parabolic surfaces (mirrors), X-ray telescopes generally use a Wolter telescope consisting of nested cylindrical paraboloid and hyperboloid surfaces coated with iridium or gold. X-ray photons would be absorbed by normal mirror surfaces, so mirrors with a low grazing angle are necessary to reflect them. Chandra uses four pairs of nested mirrors, together with their support structure, called the High Resolution Mirror Assembly (HRMA); the mirror substrate is 2 cm-thick glass, with the reflecting surface a 33 nm iridium coating, and the diameters are 65 cm, 87 cm, 99 cm and 123 cm. The thick substrate and particularly careful polishing allowed a very precise optical surface, which is responsible for Chandra's unmatched resolution: between 80% and 95% of the incoming X-ray energy is focused into a one-arcsecond circle. However, the thickness of the substrate limits the proportion of the aperture which is filled, leading to the low collecting area compared to XMM-Newton.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: In November 1964, von Braun proposed a more ambitious plan to build a much larger station built from the S-II second stage of a Saturn V. His design replaced the S-IVB third stage with an aeroshell, primarily as an adapter for the CSM on top. Inside the shell was a 10 feet (3.0 m) cylindrical equipment section. On reaching orbit, the S-II second stage would be vented to remove any remaining hydrogen fuel, then the equipment section would be slid into it via a large inspection hatch. This became known as a "wet workshop" concept, because of the conversion of an active fuel tank. The station filled the entire interior of the S-II stage's hydrogen tank, with the equipment section forming a "spine" and living quarters located between it and the walls of the booster. This would have resulted in a very large 33 by 45 feet (10 by 14 m) living area. Power was to be provided by solar cells lining the outside of the S-II stage.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Rainforests are characterized by a closed and continuous tree canopy, moisture-dependent vegetation, the presence of epiphytes and lianas and the absence of wildfire. Rainforest can be classified as tropical rainforest or temperate rainforest, but other types have been described. Estimates vary from 40% to 75% of all biotic species being indigenous to the rainforests. There may be many millions of species of plants, insects and microorganisms still undiscovered in tropical rainforests. Tropical rainforests have been called the "jewels of the Earth" and the "world's largest pharmacy", because over one quarter of natural medicines have been discovered there.Rainforests as well as endemic rainforest species are rapidly disappearing due to deforestation, the resulting habitat loss and pollution of the atmosphere.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Eldar Buildings for Warhammer 40K. The Aeldari (formerly referred to as the Eldar) are based on High Elves of fantasy fiction. Aeldari have very long lifespans and all of them have some psychic ability. The Aeldari travel the galaxy via a network of magical tunnels called "the Webway", to which they have exclusive access. In the distant past, the Aeldari ruled an empire that dominated much of the galaxy, but it was destroyed in a magical cataclysm along with most of the population. The surviving Aeldari are divided into two major subfactions: the ascetic inhabitants of massive starships called Craftworlds; and the sadistic Drukhari (also known as "Dark Eldar"), who inhabit a city hidden within the Webway. There are a number of minor subfactions too: the Harlequins, followers of the Laughing God Cegorach; and the Ynnari, followers of the death god Ynnead. Although it has been 10,000 years since their empire's fall, the Aeldari have never recovered, due to their low fertility and aggression by other races.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Thermal Bath In Japan Wild Nature Monkeys snowing
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Medieval castle behind a lake in the countryside
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The mangrove biome, often called the mangrove forest or mangal, is a distinct saline woodland or shrubland habitat characterized by depositional coastal environments, where fine sediments (often with high organic content) collect in areas protected from high-energy wave action. The saline conditions tolerated by various mangrove species range from brackish water, through pure seawater (3 to 4% salinity), to water concentrated by evaporation to over twice the salinity of ocean seawater (up to 9% salinity).
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Face enhance: No
  • Upscale & Enhance: 0