#odesa

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A Nissen hut is made from a sheet of metal bent into half a cylinder and planted in the ground with its axis horizontal. The cross-section is not precisely semi-circular, because the bottom of the hut curves out slightly. The exterior is formed from curved corrugated steel sheets 10 feet 6 inches by 2 feet 2 inches (3.2 × 0.7 m), laid with a two-corrugation lap at the side and a 6-inch (15 cm) overlap at the ends. Three sheets cover the arc of the hut. They are attached to five 3 × 2 inch (7.5 × 5 cm) wooden purlins and 3 × 2 inch wooden spiking plates at the ends of the floor joists. The purlins are attached to eight T-shaped ribs (1¾ × 1¾ × ⅛ inch; 4.5 × 4.5 × 0.5 cm) set at 6 feet 0.5 inch (1.8 m) centres. Each rib consists of three sections bolted together using splice plates, and each end is bolted to the floor at the bearers. With each rib are two straining wires, one on each side, and a straining ratchet (or in some cases a simple fencing wire strainer). The wires are strained during construction. The straining wires do not appear in the original Nissen patent.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A dam is a barrier that stops or restricts the flow of surface water or underground streams. Reservoirs created by dams not only suppress floods but also provide water for activities such as irrigation, human consumption, industrial use, aquaculture, and navigability. Hydropower is often used in conjunction with dams to generate electricity. A dam can also be used to collect or store water which can be evenly distributed between locations. Dams generally serve the primary purpose of retaining water, while other structures such as floodgates or levees (also known as dikes) are used to manage or prevent water flow into specific land regions. The earliest known dam is the Jawa Dam in Jordan, dating to 3,000 BC.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Modern track typically uses hot-rolled steel with a profile of an asymmetrical rounded I-beam.[14] Unlike some other uses of iron and steel, railway rails are subject to very high stresses and have to be made of very high-quality steel alloy. It took many decades to improve the quality of the materials, including the change from iron to steel. The stronger the rails and the rest of the trackwork, the heavier and faster the trains the track can carry.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section. Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: In most of the world, sheet metal thickness is consistently specified in millimeters. In the U.S., the thickness of sheet metal is commonly specified by a traditional, non-linear measure known as its gauge. The larger the gauge number, the thinner the metal. Commonly used steel sheet metal ranges from 30 gauge to about 7 gauge. Gauge differs between ferrous (iron-based) metals and nonferrous metals such as aluminum or copper. Copper thickness, for example, is measured in ounces, representing the weight of copper contained in an area of one square foot. Parts manufactured from sheet metal must maintain a uniform thickness for ideal results.[1]
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Sheet metal is metal formed into thin, flat pieces, usually by an industrial process. Sheet metal is one of the fundamental forms used in metalworking, and it can be cut and bent into a variety of shapes. Thicknesses can vary significantly; extremely thin sheets are considered foil or leaf, and pieces thicker than 6 mm (0.25 in) are considered plate, such as plate steel, a class of structural steel. Sheet metal is available in flat pieces or coiled strips. The coils are formed by running a continuous sheet of metal through a roll slitter.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: This « eternal stretching street that is elegant as an I » as Victor Hugo, used to say was created in the 18th Century to resolve the traffic jams and the hygiene problems in the overcrowded old districts by controlling at the same time the popular uprising of the capital city. The model of the rue de Rivoli was extended to all the new Parisian streets leading to a standardization considered by some artists of that time such as the architect as «stifling monotony». The « Mountain Towers » project aims at controlling smog, making denser and naturalizing thus type of hyper energy and space consuming urbanism by the construction of bioclimatic mountains integratingthe renewable energies on the roofs and in the heart of the blocks. The « Mountain Towers » with positive energies will enable thus to triple vertically the housing in each Parisian housing block by distributing the structural loads through the old ducts of blocked chimneys.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Paris has always been rebuilt on itself. Because of a lack of political ambition and visions for the future, is it condemned now in 2014 to remain a museum city or to gentrification? This is the question asked by the « Mountain Towers » to the historic Paris and more precisely to the rue de Rivoli. With its severe elegance and its grandiose rigour of the neoclassicism, the rue de Rivoli, named as the « wall-street », crossed the heart of Paris and stretches from east to west on almost 3 km on the right bank of the Seine river. The urban constraints of the First Empire in the west, same as of the Haussmann period in the east about the alignment and the size of all the buildings of the street offer to Paris its monumental appearance with strict lines and surprising effect of perspective that suited Napoleon whowanted to build a prestigious street dedicated to luxury.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Following the Climate Energy Plan of Paris aimed at reducing 75% of the greenhouse gas emissions within 2050, the « 2050 PARIS SMART CITY » project is a research and development work on the integration of high-rise buildings with plus-energy (BEPOS) producing by solidarity all together energy for the surrounding areas. In order to fight against the urban heat-island phenomenon by increasing in the same time the density of the city in the long-term, this study presents 8 prototypes of mixed towers. These towers repatriate the nature in the heart of the city and integrate from their design the rules of bioclimatism and the renewable and recyclable energies in short loop through innovative systems. Turned to new social innovations, they invent first new eco-responsible ways of life to implement the quality of life of the city-dwellers in the respect of the environment.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: This name combines the Greek word "thalassa", which means sea, and "polis", which means city. Therefore, Thalasopolis would be the city of the sea. The Thalasopolis concept is an idea that proposes the creation of self-sufficient communities built on water. This idea stems from growing concern about climate change, rising sea levels, declining natural resources, and overpopulation on land. The idea of ​​this project is the construction of a floating mega city in the sea that is totally sustainable and energetically self-sufficient. The city would be made up of curved modules, inspired by ship design, with an aerodynamic shape to reduce wind and water resistance, and made of highly corrosion-resistant materials. Each of these modules would be designed to be energy efficient and would generate its own power through the use of solar panels and wind turbines. In addition, advanced technologies for wastewater treatment and rainwater collection for the supply of drinking water would be used, as well as the implementation of waste recycling and composting systems. One of the most important features of this city would be the inclusion of large interior gardens in each module, which wo
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The connection between the different modules would be carried out by means of bridges, which would allow residents to move between the different spaces of the city easily and safely. The city in the sea would have a focus on the conservation of the environment and marine biodiversity. This would be achieved through the protection of marine life and the restoration of marine ecosystems. In addition, the city would be designed to withstand extreme weather events, such as hurricanes and tsunamis. Residents would have access to basic services such as schools, shops, health services, sports facilities, among others, in addition to a circular economy. The idea of ​​a city in the sea has been proposed by various companies and organizations, and although it is still a concept in development, it is believed that it could be an innovative and sustainable solution to the overpopulation and environmental problems facing our planet.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The artificial island "Luampa Island" concept consists of 7 separate blocks, 4 low-rise, 2 middle-floor and 1 skyscraper. The blocks surround a circle that is constantly connected to each other in a unity. There is a shopping mall open to "Luampa Island", which is a mixed structure, a 5-star hotel with 160 rooms, office floors and residential blocks. The large marina, located in the middle of the flat, is in the form of the common courtyard of the residential and hotel buildings. The island of Luampa allows the creation of new areas on the existing shallow waters at the least cost. It is especially designed for small centers with little or no built-up areas. In order to increase the green area, balconies are designed on all floors of the project floors and these balconies are equipped with green flower pots.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Calatrava designed it from the outset in white concrete, like the rest of the ensemble, with a heavy metal. Its structure resembles a lattice, with a succession of 55 fixed and 54 floating arches of metal. The maximum height from the bottom of the arches fixed to the floating key is 18 meters. The tour covers the floor with wood Teak, a tropical wood suitable for installation in outdoor areas, as it supports the assault of wind and rain with a minimum wear.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: It forms part of the project, it is constructed of three skyscrapers of 308, 266 and 220 m. The project has been put on hold and the possibilities that it will be finished are seen by many as doubtful. Yet the Valencian architect Santiago Calatrava is facing legal action from his home city of Valencia because parts of the opera house roof at his City of Arts and Sciences complex are falling off just eight years after completion. He has been heavily criticized for the cost of the City of Arts and Sciences complex and was accused of ‘bleeding Valencia dry’ over alleged fees of €100 million for the showpiece cultural center, despite the coming in four times over budget at over €1 billion.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: An algorithmic process of design has been followed by creating a differentiated array of a hexagonal floor plates that variably changes scale based on environmental criteria, functional aspects, structural logics and aesthetic parameters. Parametric modeling and computational simualtions, namely, solar insolation and CFD analysis were carried out to verify the climatic effects of twisting geometries. Key to these forms of adaptation is the relationship of the building to their environment and the contextual forces that shape the form development and environmental behavior.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A central tube core anchors each tower that arises 290m above ground level carrying a twisting form. The form is encapsulated by a triangulated exoskeleton articulating a multistory atrium located at the extremities leaving clear floor plates for functional distribution. The triangulated structure geometry with an average base height of 1:4 floors extends across the facade to form the exoskeleton. The rotational and scaling aspects of floor plates around the central cores creates a folding form that grows high to create an amorphous geometry with atriums that spiral along the towers in two different directions as per climatic aspects. The parametric model based on environmental calculation projects the lines of the exoskeleton onto the free-form facade, with which a mesh wireframe is generated. In the free-form areas, the exoskeleton’s tubular structural steel is single-curved and clad with composite aluminum panels, most of which are double curved. A multi-objective optimization is carried out to create a novel form where two dynamic looking towers connect at three distinct levels with structural bridges formed by tubed trusses that stretch out from the exoskeleton.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: This design is proposed in the vicinity of New York Metropolis as the model city. It is, in fact, a number of skyscrapers with smart hydraulic structures and independent functions which are compactly put together. This structure is, in fact, a smart-structure super robot inspired by Boston Dynamics technology and managed by artificial intelligence. One of the main differences of the hospital structure and form is that its function, working mechanism, and architectural form change thanks to artificial intelligence and robotics according to the situation. As soon as a crisis arises, the structures are spread apart on huge rails and hydraulic infrastructures at land or sea level and spread at high levels like tree branches. Each of these structures has thousands of modular and movable chambers that move horizontally and vertically , just like an elevator, in the body of the structure according to the patient’s conditions.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The idea here is to create a form whose base is a square and follows the lines of the surrounding streets and rises to a circular shape which is an ideal form for wind force resistance. Facade elements are organically designed to reduce the feeling of square to circle deformation. The orientation of the elements can vary to create alternative patterns. Here we only have two alternatives, but we can play with the directions and scale of the elements to create many other alternatives. The large marina, located in the middle of the flat, is in the form of the common courtyard of the residential and hotel buildings. The island of Luampa allows the creation of new areas on the existing shallow waters at the least cost. It is especially designed for small centers with little or no built-up areas. In order to increase the green area, balconies are designed on all floors of the project floors and these balconies are equipped with green flower pots.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The idea here is to create a form whose base is a square and follows the lines of the surrounding streets and rises to a circular shape which is an ideal form for wind force resistance. Facade elements are organically designed to reduce the feeling of square to circle deformation. The orientation of the elements can vary to create alternative patterns. Here we only have two alternatives, but we can play with the directions and scale of the elements to create many other alternatives. The large marina, located in the middle of the flat, is in the form of the common courtyard of the residential and hotel buildings. The island of Luampa allows the creation of new areas on the existing shallow waters at the least cost. It is especially designed for small centers with little or no built-up areas. In order to increase the green area, balconies are designed on all floors of the project floors and these balconies are equipped with green flower pots.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The building has a combined structural system that represents a frame- barrel supporting system with cantilevered ceilings with shifted diagonal axes. The rotation of the volumes around the axis is provided by deep beams with a height of 3.25 m in each block with reinforcement of columns. In residential blocks, the stiffness of the corner sections is ensured by capitals that transfer the load to a deep beam. The office block is designed as a solid metal structure of I-beams with a section of 700x700, with a swivel connection with the columns and a stiffness core. To ensure a geometrically unchanged design, a diagonal type of lattice with an ascending diagonal was chosen. The spatial rigidity of the building is ensured by the joint work of load-bearing structures: reinforced concrete floor slabs, beams, trusses, columns and vertical cores, which are the staircase and elevator units that have a hard seal in the base plate.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0