#neobaroque

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The most important insulation material is air. A variety of solid, liquid, and gaseous insulators are also used in electrical apparatus. In smaller transformers, generators, and electric motors, insulation on the wire coils consists of up to four thin layers of polymer varnish film. Film-insulated magnet wire permits a manufacturer to obtain the maximum number of turns within the available space. Windings that use thicker conductors are often wrapped with supplemental fiberglass insulating tape. Windings may also be impregnated with insulating varnishes to prevent electrical corona and reduce magnetically induced wire vibration. Large power transformer windings are still mostly insulated with paper, wood, varnish, and mineral oil; although these materials have been used for more than 100 years, they still provide a good balance of economy and adequate performance. Busbars and circuit breakers in switchgear may be insulated with glass-reinforced plastic insulation, treated to have low flame spread and to prevent tracking of current across the material.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A volcano is an opening in a planet or moon’s crust through which molten rock, hot gases, and other materials erupt. Volcanoes often form a hill or mountain as layers of rock and ash build up from repeated eruptions. Volcanoes are classified as active, dormant, or extinct. Active volcanoes have a recent history of eruptions; they are likely to erupt again. Dormant volcanoes have not erupted for a very long time but may erupt at a future time. Extinct volcanoes are not expected to erupt in the future. Inside an active volcano is a chamber in which molten rock, called magma, collects. Pressure builds up inside the magma chamber, causing the magma to move through channels in the rock and escape onto the planet’s surface. Once it flows onto the surface the magma is known as lava.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Lava lakes are large volumes of molten lava, usually basaltic, contained in a volcanic vent, crater, or broad depression. The term is used to describe both lava lakes that are wholly or partly molten and those that are solidified (sometimes referred to as frozen lava lakes).
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: By January 2005, 2.7 cubic kilometers (0.65 cu mi) of magma covered an area of more than 117 square kilometers (45 sq mi) and added 230 acres (0.93 km2) of land to the southeast coast of Hawaiʻi. The eruption claimed at least 189 buildings and 14 kilometers (8.7 mi) of highways, as well as a church, a store, the Wahaʻula Visitor Center, and many ancient Hawaiian sites, including the Wahaʻula heiau. The coastal highway has been closed since 1987, as parts of the road have been buried under lava up to 35 meters (115 ft) thick.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Kīlauea is an active shield volcano in the Hawaiian Islands. Located along the southeastern shore of the Big Island of Hawaiʻi, the volcano is between 210,000 and 280,000 years old and emerged above sea level about 100,000 years ago. Historically, it is the most active of the five volcanoes that together form Hawaii island. Kīlauea is also one of the most active volcanoes on Earth, and the most recent eruption began on September 29, 2021, when several vents began to erupt lava within Halemaʻumaʻu, a pit crater in the volcano's summit caldera, and ended March 7, 2023.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A lava fountain is a volcanic phenomenon in which lava is forcefully but non-explosively ejected from a crater, vent, or fissure.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Rarely, a volcanic cone may fill with lava but not erupt. Lava which pools within the caldera is known as a lava lake. Lava lakes do not usually persist for long, either draining back into the magma chamber once pressure is relieved (usually by venting of gases through the caldera), or by draining via eruption of lava flows or pyroclastic explosion.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Cinder cones and spatter cones are small-scale features formed by lava accumulation around a small vent on a volcanic edifice. Cinder cones are formed from tephra or ash and tuff which is thrown from an explosive vent. Spatter cones are formed by accumulation of molten volcanic slag and cinders ejected in a more liquid form.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A caldera, which is a large subsidence crater, can form in a stratovolcano, if the magma chamber is partially or wholly emptied by large explosive eruptions; the summit cone no longer supports itself and thus collapses in on itself afterwards. Such features may include volcanic crater lakes and lava domes after the event.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Volcanoes are the primary landforms built by repeated eruptions of lava and ash over time. They range in shape from shield volcanoes with broad, shallow slopes formed from predominantly effusive eruptions of relatively fluid basaltic lava flows, to steeply-sided stratovolcanoes (also known as composite volcanoes) made of alternating layers of ash and more viscous lava flows typical of intermediate and felsic lavas.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A pāhoehoe flow typically advances as a series of small lobes and toes that continually break out from a cooled crust. It also forms lava tubes where the minimal heat loss maintains low viscosity. The surface texture of pāhoehoe flows varies widely, displaying all kinds of bizarre shapes often referred to as lava sculpture. With increasing distance from the source, pāhoehoe flows may change into ʻaʻā flows in response to heat loss and consequent increase in viscosity. Experiments suggest that the transition takes place at a temperature between 1,200 and 1,170 °C, with some dependence on shear rate. Pahoehoe lavas typically have a temperature of 1,100 to 1,200 °C.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A public address system (or PA system) is an electronic system comprising microphones, amplifiers, loudspeakers, and related equipment. It increases the apparent volume (loudness) of a human voice, musical instrument, or other acoustic sound source or recorded sound or music. PA systems are used in any public venue that requires that an announcer, performer, etc. be sufficiently audible at a distance or over a large area. Typical applications include sports stadiums, public transportation vehicles and facilities, and live or recorded music venues and events. A PA system may include multiple microphones or other sound sources, a mixing console to combine and modify multiple sources, and multiple amplifiers and loudspeakers for louder volume or wider distribution.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Rack-mountable equipment is traditionally mounted by bolting or clipping its front panel to the rack. Within the IT industry, it is common for network/communications equipment to have multiple mounting positions, including table-top and wall mounting, so rack-mountable equipment will often feature L-brackets that must be screwed or bolted to the equipment prior to mounting in a 19-inch rack. With the prevalence of 23-inch racks in the Telecoms industry, the same practice is also common, but with equipment having 19-inch and 23-inch brackets available, enabling them to be mounted in existing racks.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Early computers were meant to be used only for calculations. Simple manual instruments like the abacus have aided people in doing calculations since ancient times. Early in the Industrial Revolution, some mechanical devices were built to automate long, tedious tasks, such as guiding patterns for looms. More sophisticated electrical machines did specialized analog calculations in the early 20th century. The first digital electronic calculating machines were developed during World War II. The first semiconductor transistors in the late 1940s were followed by the silicon-based MOSFET (MOS transistor) and monolithic integrated circuit chip technologies in the late 1950s, leading to the microprocessor and the microcomputer revolution in the 1970s. The speed, power and versatility of computers have been increasing dramatically ever since then, with transistor counts increasing at a rapid pace (as predicted by Moore's law), leading to the Digital Revolution during the late 20th to early 21st centuries.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A computer is a machine that can be programmed to carry out sequences of arithmetic or logical operations (computation) automatically. Modern digital electronic computers can perform generic sets of operations known as programs. These programs enable computers to perform a wide range of tasks. A computer system is a nominally complete computer that includes the hardware, operating system (main software), and peripheral equipment needed and used for full operation. This term may also refer to a group of computers that are linked and function together, such as a computer network or computer cluster.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: An optical fiber, or optical fibre in Commonwealth English, is a flexible, transparent fiber made by drawing glass (silica) or plastic to a diameter slightly thicker than that of a human hair. Optical fibers are used most often as a means to transmit light between the two ends of the fiber and find wide usage in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data transfer rates) than electrical cables. Fibers are used instead of metal wires because signals travel along them with less loss; in addition, fibers are immune to electromagnetic interference, a problem from which metal wires suffer. Fibers are also used for illumination and imaging, and are often wrapped in bundles so they may be used to carry light into, or images out of confined spaces, as in the case of a fiberscope. Specially designed fibers are also used for a variety of other applications, some of them being fiber optic sensors and fiber lasers.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Towers for support of the lines are made of wood either grown or laminated, steel or aluminum (either lattice structures or tubular poles), concrete, and occasionally reinforced plastics. The bare wire conductors on the line are generally made of aluminum (either plain or reinforced with steel or composite materials such as carbon and glass fiber), though some copper wires are used in medium-voltage distribution and low-voltage connections to customer premises. A major goal of overhead power line design is to maintain adequate clearance between energized conductors and the ground so as to prevent dangerous contact with the line, and to provide reliable support for the conductors, resilience to storms, ice loads, earthquakes and other potential damage causes. Today overhead lines are routinely operated at voltages exceeding 765,000 volts between conductors.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: In electrical engineering, a disconnector, disconnect switch or isolator switch is used to ensure that an electrical circuit is completely de-energized for service or maintenance. They are often found in electrical distribution and industrial applications, where machinery must have its source of driving power removed for adjustment or repair. Disconnectors can be operated manually or by a motor, and may be paired with an earthing switch to ground the portion that has been isolated from the system for ensuring the safety of equipment and the personnel working on it.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Venus is the second planet from the Sun. It is sometimes called Earth's "sister" or "twin" planet as it is almost as large and has a similar composition. As an interior planet to Earth, Venus (like Mercury) appears in Earth's sky never far from the Sun, either as morning star or evening star. Aside from the Sun and Moon, Venus is the brightest natural object in Earth's sky, capable of casting visible shadows on Earth in dark conditions and being visible to the naked eye in broad daylight.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Volcanic ash consists of fragments of rock, mineral crystals, and volcanic glass, created during volcanic eruptions and measuring less than 2 mm (0.079 inches) in diameter.[1] The term volcanic ash is also often loosely used to refer to all explosive eruption products (correctly referred to as tephra), including particles larger than 2 mm. Volcanic ash is formed during explosive volcanic eruptions when dissolved gases in magma expand and escape violently into the atmosphere. The force of the gases shatters the magma and propels it into the atmosphere where it solidifies into fragments of volcanic rock and glass. Ash is also produced when magma comes into contact with water during phreatomagmatic eruptions, causing the water to explosively flash to steam leading to shattering of magma. Once in the air, ash is transported by wind up to thousands of kilometres away.
  • Using base image: Yes