#machine

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: In November 1964, von Braun proposed a more ambitious plan to build a much larger station built from the S-II second stage of a Saturn V. His design replaced the S-IVB third stage with an aeroshell, primarily as an adapter for the CSM on top. Inside the shell was a 10 feet (3.0 m) cylindrical equipment section. On reaching orbit, the S-II second stage would be vented to remove any remaining hydrogen fuel, then the equipment section would be slid into it via a large inspection hatch. This became known as a "wet workshop" concept, because of the conversion of an active fuel tank. The station filled the entire interior of the S-II stage's hydrogen tank, with the equipment section forming a "spine" and living quarters located between it and the walls of the booster. This would have resulted in a very large 33 by 45 feet (10 by 14 m) living area. Power was to be provided by solar cells lining the outside of the S-II stage.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Phobos has dimensions of 27 km × 22 km × 18 km, and retains too little mass to be rounded under its own gravity. Phobos does not have an atmosphere due to its low mass and low gravity. It is one of the least reflective bodies in the Solar System, with an albedo of about 0.071. Infrared spectra show that it has carbon-rich material found in carbonaceous chondrites, and its composition shows similarities to that of Mars' surface. Phobos's density is too low to be solid rock, and it is known to have significant porosity. These results led to the suggestion that Phobos might contain a substantial reservoir of ice. Spectral observations indicate that the surface regolith layer lacks hydration, but ice below the regolith is not ruled out.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Mars Outpost is a concept for a human base on the planet Mars that was developed by the United States in the 1980s.[1] The components and design were based on an earlier lunar test bed outpost.[1] Development would go through several phases over four years, from an 'Emplacement Phase' to a 'Consolidation Phase', after which full use by its crew could commence.[1] Components of the base would include a habitat module, pressurized rover dock/equipment lock, airlocks, and a 16 meters (17 yards) constructed habitat.[1] The 16 m habitat would be constructed in situ.[1] Other technology for the base design includes a meteorological balloon, unpressurized rover, storage/work area, an area for geophysical experiments, and an area antenna.[1] The Mars Outpost would be designed for a crew of 7 astronauts.[1] Their main tasks would be to do research on mining of Mars and Phobos, life sciences, technology, and Solar System exploration.[1] The Office of Space Exploration did case studies that include establishing a human presence on another planet in 1988 and 1989.[2] An objective of the Mars Evolution 1989 study was, "Emplace a permanent, largely self-sufficient outpost on the surface of Mars.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A vision for habitats published by NASA from CASE FOR MARS from the 1980s, featuring the re-use of landing vehicles, in-situ soil use for enhanced radiation shielding, and green houses. A bay for a Mars rover is also visible.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Unpressurized Mars rovers would lack a pressurized environment for the crew, being functionally similar to the Lunar Roving Vehicle. There are several advantages to having an unpressurized rover as opposed to a pressurized variant, such as a reduced weight. Since range of a potential rover that carries crew from base is important, a light weight is an advantage and therefore is a good choice for long range missions. An unpressurized rovers can also be used to move heavy load, travel short distance from base to the location of a bigger pressurized rover.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Human Mars mission designs usually include Mars EVA suits, in this vision people in suits in combination with crewed rovers and other equipment maneuver on the Martian surface. Mission enhancing technologies to give astronauts an edge are often explored, such as a wrist mounted video display of some kind in this case.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Mars suits used in conjunction with other surface elements on Mars (artwork)
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Shrouded microwave relay dishes on a communications tower in Australia. A satellite television dish, an example of an offset fed dish. Cassegrain satellite communication antenna in Sweden. Offset Gregorian antenna used in the Allen Telescope Array, a radio telescope at the University of California Berkeley, US. Vertical "orange peel" antenna for military height finder radar, Germany. Early cylindrical parabolic antenna, 1931, Nauen, Germany. Air traffic control radar antenna, near Hannover, Germany. ASR-9 Airport surveillance radar antenna. "Orange peel" antenna for air search radar, Finland.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: At the microwave frequencies used in many parabolic antennas, waveguide is required to conduct the microwaves between the feed antenna and transmitter or receiver. Because of the high cost of waveguide runs, in many parabolic antennas the RF front end electronics of the receiver is located at the feed antenna, and the received signal is converted to a lower intermediate frequency (IF) so it can be conducted to the receiver through cheaper coaxial cable. This is called a low-noise block downconverter. Similarly, in transmitting dishes, the microwave transmitter may be located at the feed point. An advantage of parabolic antennas is that most of the structure of the antenna (all of it except the feed antenna) is nonresonant, so it can function over a wide range of frequencies (i.e. a wide bandwidth). All that is necessary to change the frequency of operation is to replace the feed antenna with one that operates at the desired frequency. Some parabolic antennas transmit or receive at multiple frequencies by having several feed antennas mounted at the focal point, close together.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: This was followed by landings by Apollo 12 (LM-6 Intrepid) and Apollo 14 (LM-8 Antares). In April 1970, the Apollo 13 LM-7 Aquarius played an unexpected role in saving the lives of the three astronauts after an oxygen tank in the service module ruptured, disabling the CSM. Aquarius served as a "lifeboat" for the astronauts during their return to Earth. Its descent stage engine[16] was used to replace the crippled CSM Service Propulsion System engine, and its batteries supplied power for the trip home and recharged the Command Module's batteries critical for reentry. The astronauts splashed down safely on April 17, 1970. The LM's systems, designed to support two astronauts for 45 hours (including twice depressurization and repressurization causing loss of oxygen supply), actually stretched to support three astronauts for 90 hours (without depressurization and repressurization and loss of oxygen supply).
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The Apollo Lunar Module was chiefly designed by Grumman aerospace engineer Thomas J. Kelly. The first LEM design looked like a smaller version of the Apollo command and service module (a cone-shaped cabin atop a cylindrical propulsion section) with folding legs. The second design invoked the idea of a helicopter cockpit with large curved windows and seats, to improve the astronauts' visibility for hover and landing. This also included a second, forward docking port, allowing the LEM crew to take an active role in docking with the CSM.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Sci-Fi. The ISS consists of pressurised habitation modules, structural trusses, photovoltaic solar arrays, thermal radiators, docking ports, experiment bays and robotic arms. Major ISS modules have been launched by Russian Proton and Soyuz rockets and US Space Shuttles. The station is serviced by a variety of visiting spacecraft: the Russian Soyuz and Progress, the SpaceX Dragon 2, and the Northrop Grumman Space Systems Cygnus, and formerly the European Automated Transfer Vehicle (ATV), the Japanese H-II Transfer Vehicle, and SpaceX Dragon 1. The Dragon spacecraft allows the return of pressurised cargo to Earth, which is used, for example, to repatriate scientific experiments for further analysis. As of April 2022, 251 astronauts, cosmonauts, and space tourists from 20 different nations have visited the space station, many of them multiple times.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The ELC are four un-pressurized attached payloads, some designed by the Brazilian Space Agency, for the International Space Station (ISS) that provides mechanical mounting surfaces, electrical power, and command and data handling services for science experiments on the ISS. The ELCs have a deck size of about 14 feet by 16 feet and spans the width of the space shuttle's payload bay. They are made of steel, coated with UV paint. Each one is capable of providing scientists with a platform and infrastructure to deploy experiments in the vacuum of space without requiring a separate dedicated Earth-orbiting satellite. Each carrier is capable of carrying 9,800 lbs. to orbit and will also serve as parking fixtures for spare ISS hardware (ORUs) which can be retrieved when needed. Experiments are mounted on ExPRESS payload adapters (ExPA) which are about the same size as the FRAMs that hold ORUs.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: During nominal CRS missions, Cygnus maneuvers close to the International Space Station, where the Canadarm2 robotic arm grapples the spacecraft and berths it to a Common Berthing Mechanism on the Harmony module in a similar fashion to the Japanese H-II Transfer Vehicle and the retired SpaceX Dragon, but not the other active American CRS Dragon 2 vehicle, which docks autonomously. For typical missions, Cygnus is planned to remain berthed for about 30 days. Unlike Dragon 2 and the earlier Dragon, Cygnus does not provide cargo return capability. However, it can be loaded with obsolete equipment and trash for destructive reentry similar to the Russian Progress vehicles.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: ESP-2 was detached from its Keel Yoke Assembly (which remained in the Orbiter) and installed with the assistance of Space Shuttle Discovery's robotic arm and two spacewalkers during the STS-114 mission. It is much larger than ESP-1 with eight FRAM sites creating room for up to eight spare parts (ORUs). Like ESP-1, it is powered by the Unity Module. However, unlike ESP-1, ESP-2 is attached to the Quest Joint Airlock using a specialized ESP Attachment Device (ESPAD). ESP-2 and ESP-3 are deployable versions of the integrated cargo carrier and have the same dimensions, approximately 8.5 feet (2.6 m) long and 14 feet (4.3 m) wide.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The complexity of an integrated circuit is bounded by physical limitations on the number of transistors that can be put onto one chip, the number of package terminations that can connect the processor to other parts of the system, the number of interconnections it is possible to make on the chip, and the heat that the chip can dissipate. Advancing technology makes more complex and powerful chips feasible to manufacture. A minimal hypothetical microprocessor might include only an arithmetic logic unit (ALU), and a control logic section. The ALU performs addition, subtraction, and operations such as AND or OR. Each operation of the ALU sets one or more flags in a status register, which indicate the results of the last operation (zero value, negative number, overflow, or others). The control logic retrieves instruction codes from memory and initiates the sequence of operations required for the ALU to carry out the instruction. A single operation code might affect many individual data paths, registers, and other elements of the processor.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The two versions were very similar, 80 percent of their components being the same. The Centaur G-Prime stage had two RL10-3-3A engines, each with 73,400 newtons (16,500 lbf) thrust, and a specific impulse of 446.4 seconds, with a 5:1 fuel ratio. The Centaur G stage had two RL10-3-3B engines, each with 66,700 newtons (15,000 lbf) thrust, and specific impulse of 440.4 seconds, with a 6:1 fuel ratio. The engines were capable of multiple restarts after long periods of coasting in space and had a hydraulic gimbal actuation system powered by the turbopump. The Centaur G and G-Prime avionics were the same as that of the standard Centaur and were still mounted in the forward equipment module. They used a 24-bit Teledyne Digital Computer Unit with 16 kilobytes of RAM to control guidance and navigation. They still used the same pressurized steel tank, but with more insulation including a two-layer foam blanket over the forward bulkhead and a three-layer radiation shield. Other changes included new forward and aft adapters; a new propellant fill, drain and dump system; and an S band transmitter and RF system compatible with the TDRS system.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The type known as a thermionic tube or thermionic valve utilizes thermionic emission of electrons from a hot cathode for fundamental electronic functions such as signal amplification and current rectification. Non-thermionic types such as a vacuum phototube, however, achieve electron emission through the photoelectric effect, and are used for such purposes as the detection of light intensities. In both types, the electrons are accelerated from the cathode to the anode by the electric field in the tube.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The thermionic triode, a vacuum tube invented in 1907, enabled amplified radio technology and long-distance telephony. The triode, however, was a fragile device that consumed a substantial amount of power. In 1909, physicist William Eccles discovered the crystal diode oscillator. Physicist Julius Edgar Lilienfeld filed a patent for a field-effect transistor (FET) in Canada in 1925, which was intended to be a solid-state replacement for the triode. Lilienfeld also filed identical patents in the United States in 1926 and 1928. However, Lilienfeld did not publish any research articles about his devices nor did his patents cite any specific examples of a working prototype. Because the production of high-quality semiconductor materials was still decades away, Lilienfeld's solid-state amplifier ideas would not have found practical use in the 1920s and 1930s, even if such a device had been built. In 1934, inventor Oskar Heil patented a similar device in Europe.
  • Using base image: Yes

Future Girl

• Model: Artistic

• Size: 512 X 1152 (0.59 MP)

• Used settings:

  • Prompt: "Think of a unique and futuristic cyborg or android character that you would love to see brought to life. Describe their appearance, including their features, clothing, and any other defining characteristics that make them stand out from other cyborgs or androids."
  • Using base image: Yes