#architecture

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Laser-hybrid welding is a type of welding process that combines the principles of laser beam welding and arc welding. The combination of laser light and an electrical arc into an amalgamated welding process has existed since the 1970s, but has only recently been used in industrial applications. There are three main types of hybrid welding process, depending on the arc used: TIG, plasma arc or MIG augmented laser welding. While TIG-augmented laser welding was the first to be researched, MIG is the first to go into industry and is commonly known as hybrid laser welding. Whereas in the early days laser sources still had to prove their suitability for industrial use, today they are standard equipment in many manufacturing enterprises. The combination of laser welding with another weld process is called a "hybrid welding process". This means that a laser beam and an electrical arc act simultaneously in one welding zone, influencing and supporting each other.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The 12AX7 is the most common member of what eventually became a large family of twin-triode vacuum tubes, manufactured all over the world, all sharing the same pinout (EIA 9A). Most use heaters which can be optionally wired in series (12.6V, 150 mA) or parallel (6.3V, 300 mA). Other tubes, which in some cases can be used interchangeably in an emergency or for different performance characteristics, include the 12AT7, 12AU7, 12AV7, 12AY7, and the low-voltage 12U7, plus many four-digit EIA series dual triodes. They span a wide range of voltage gain and transconductance. Different versions of each were designed for enhanced ruggedness, low microphonics, stability, lifespan, etc.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Heat treating (or heat treatment) is a group of industrial, thermal and metalworking processes used to alter the physical, and sometimes chemical, properties of a material. The most common application is metallurgical. Heat treatments are also used in the manufacture of many other materials, such as glass. Heat treatment involves the use of heating or chilling, normally to extreme temperatures, to achieve the desired result such as hardening or softening of a material. Heat treatment techniques include annealing, case hardening, precipitation strengthening, tempering, carburizing, normalizing and quenching. Although the term heat treatment applies only to processes where the heating and cooling are done for the specific purpose of altering properties intentionally, heating and cooling often occur incidentally during other manufacturing processes such as hot forming or welding.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Many elements are often alloyed with steel. The main purpose for alloying most elements with steel is to increase its hardenability and to decrease softening under temperature. Tool steels, for example, may have elements like chromium or vanadium added to increase both toughness and strength, which is necessary for things like wrenches and screwdrivers. On the other hand, drill bits and rotary files need to retain their hardness at high temperatures. Adding cobalt or molybdenum can cause the steel to retain its hardness, even at red-hot temperatures, forming high-speed steels. Often, small amounts of many different elements are added to the steel to give the desired properties, rather than just adding one or two. Most alloying elements (solutes) have the benefit of not only increasing hardness, but also lowering both the martensite start temperature and the temperature at which austenite transforms into ferrite and cementite. During quenching, this allows a slower cooling rate, which allows items with thicker cross-sections to be hardened to greater depths than is possible in plain carbon-steel, producing more uniformity in strength.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Material is put on a sinter machine in two layers. The bottom layer may vary in thickness from 30 to 75 millimetres (1.2 to 3.0 in). A 12 to 20 mm sinter fraction is used, also referred to as the hearth layer. The second, covering layer consists of mixed materials, making for a total bed height of 350 to 660 millimetres (14 to 26 in). The mixed materials are applied with drum feeders and roll feeders, which distributes the nodules in certain depth throughout the sinterring machine . The upper layer is smoothed using a leveler. The material, also known as a charge, enters the ignition furnace into rows of multi-slit burners. In the case of one plant, the first (ignition) zone has eleven burners. The next (soaking/annealing) zone typically offers 12 burners. Air is sucked from the bottom of the bed of mixed material throughout the sintering machine. Fire penetrates the mixed material gradually, until it reaches the hearth layer. This end point of burning is called burn through point (BTP). The hearth layer, which is nothing but sinter in smaller size, restricts sticking of hot sinter with pallets. BTP is achieved in a certain zone of sinter machine, to optimize the process, by means
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Hydro Temple

• Model: Artistic

• Size: 896 X 704 (0.63 MP)

• Used settings:

  • Prompt: A l ” G 3 Wl
  • Upscale & Enhance: 0
  • Aspect Ratio: landscape

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Glass is a non-crystalline, often transparent, amorphous solid that has widespread practical, technological, and decorative use in, for example, window panes, tableware, and optics. Glass is most often formed by rapid cooling (quenching) of the molten form; some glasses such as volcanic glass are naturally occurring. The most familiar, and historically the oldest, types of manufactured glass are "silicate glasses" based on the chemical compound silica (silicon dioxide, or quartz), the primary constituent of sand. Soda–lime glass, containing around 70% silica, accounts for around 90% of manufactured glass. The term glass, in popular usage, is often used to refer only to this type of material, although silica-free glasses often have desirable properties for applications in modern communications technology. Some objects, such as drinking glasses and eyeglasses, are so commonly made of silicate-based glass that they are simply called by the name of the material.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Temple Trek

• Model: Artistic

• Size: 896 X 704 (0.63 MP)

• Used settings:

  • Prompt: ; L L | i ¥ 5’ = . i : o e ; “A‘ :"“Jfi;
  • Upscale & Enhance: 0
  • Aspect Ratio: landscape

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A flue-gas stack, also known as a smoke stack, chimney stack or simply as a stack, is a type of chimney, a vertical pipe, channel or similar structure through which combustion product gases called flue gases are exhausted to the outside air. Flue gases are produced when coal, oil, natural gas, wood or any other fuel is combusted in an industrial furnace, a power plant's steam-generating boiler, or other large combustion device. Flue gas is usually composed of carbon dioxide (CO2) and water vapor as well as nitrogen and excess oxygen remaining from the intake combustion air. It also contains a small percentage of pollutants such as particulate matter, carbon monoxide, nitrogen oxides and sulfur oxides. The flue gas stacks are often quite tall, up to 400 metres (1300 feet) or more, to increase the stack effect and dispersion of pollutants.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Natural gas burning on a gas stove
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: A Bunsen burner, named after Robert Bunsen, is a kind of ambient air gas burner used as laboratory equipment; it produces a single open gas flame, and is used for heating, sterilization, and combustion. The gas can be natural gas (which is mainly methane) or a liquefied petroleum gas, such as propane, butane, or a mixture. Combustion temperature achieved depends in part on the adiabatic flame temperature of the chosen fuel mixture.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

4th Gate

• Model: Artistic

• Size: 896 X 704 (0.63 MP)

• Used settings:

  • Prompt: £ RE-—7 7 R e e N et TR e L s -2 = e ey W ~ > — 7a .
  • Upscale & Enhance: 0
  • Aspect Ratio: landscape

Spice Market

• Model: Artistic

• Size: 896 X 704 (0.63 MP)

• Used settings:

  • Prompt: generate=browse=simple life=Morocco=spice market=stalls full of spices the atmosphere of an arabian market screaming traders_coaches from europe_america_asia=old drawing _charcoal_kreda_white art.
  • Upscale & Enhance: 0
  • Aspect Ratio: landscape

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Despite the name, aerogels are solid, rigid, and dry materials that do not resemble a gel in their physical properties: the name comes from the fact that they are made from gels. Pressing softly on an aerogel typically does not leave even a minor mark; pressing more firmly will leave a permanent depression. Pressing extremely firmly will cause a catastrophic breakdown in the sparse structure, causing it to shatter like glass (a property known as friability), although more modern variations do not suffer from this. Despite the fact that it is prone to shattering, it is very strong structurally. Its impressive load-bearing abilities are due to the dendritic microstructure, in which spherical particles of average size 2–5 nm are fused together into clusters. These clusters form a three-dimensional highly porous structure of almost fractal chains, with pores just under 100 nm. The average size and density of the pores can be controlled during the manufacturing process.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Titanium-sapphire refers to the lasing medium, a crystal of sapphire (Al2O3) that is doped with Ti3+ ions. A Ti:sapphire laser is usually pumped with another laser with a wavelength of 514 to 532 nm, for which argon-ion lasers (514.5 nm) and frequency-doubled Nd:YAG, Nd:YLF, and Nd:YVO lasers (527-532 nm) are used. They are capable of laser operation from 670 nm to 1,100 nm wavelength. Ti:sapphire lasers operate most efficiently at wavelengths near 800 nm.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Widmanstätten patterns, also known as Thomson structures, are figures of long nickel–iron crystals, found in the octahedrite iron meteorites and some pallasites. They consist of a fine interleaving of kamacite and taenite bands or ribbons called lamellae. Commonly, in gaps between the lamellae, a fine-grained mixture of kamacite and taenite called plessite can be found. Widmanstätten patterns describe features in modern steels titanium, and zirconium alloys.
  • Using base image: Yes (Effect strength - 40%)
  • Base image resolution: Default
  • Upscale & Enhance: 0

Cioy

• Model: Artistic

• Size: 896 X 704 (0.63 MP)

• Used settings:

  • Prompt: g & |l = == - . i . : of | 7 oy ' c i # | - s ,/ /] ‘ ] =il 4 ] g
  • Upscale & Enhance: 0
  • Aspect Ratio: landscape

Ai Mines

• Model: Artistic

• Size: 896 X 704 (0.63 MP)

• Used settings:

  • Prompt: 4 i{f : i AL A s - A & : i -~ - 1 . 'y o o | I i . 4 "' - A A CY C i 7 i . S = 3 . N o s
  • Upscale & Enhance: 0
  • Aspect Ratio: landscape

Summer House

• Model: Artistic

• Size: 896 X 704 (0.63 MP)

• Used settings:

  • Prompt: . f VA
  • Upscale & Enhance: 0
  • Aspect Ratio: landscape

The Potion Shop

• Model: Artistic

• Size: 1643 X 1278 (2.10 MP)

• Used settings:

  • Prompt: Architectural drawing, dungeon and dragons style, gothic style, alchemist shop, potion shop, interior shot, detailed, fantasy, photorealistic
  • Using base image: Yes (Effect strength - 60%)
  • Base image resolution: Default
  • Upscale & Enhance: 2