#architecture

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The ELC are four un-pressurized attached payloads, some designed by the Brazilian Space Agency, for the International Space Station (ISS) that provides mechanical mounting surfaces, electrical power, and command and data handling services for science experiments on the ISS. The ELCs have a deck size of about 14 feet by 16 feet and spans the width of the space shuttle's payload bay. They are made of steel, coated with UV paint. Each one is capable of providing scientists with a platform and infrastructure to deploy experiments in the vacuum of space without requiring a separate dedicated Earth-orbiting satellite. Each carrier is capable of carrying 9,800 lbs. to orbit and will also serve as parking fixtures for spare ISS hardware (ORUs) which can be retrieved when needed. Experiments are mounted on ExPRESS payload adapters (ExPA) which are about the same size as the FRAMs that hold ORUs.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: During nominal CRS missions, Cygnus maneuvers close to the International Space Station, where the Canadarm2 robotic arm grapples the spacecraft and berths it to a Common Berthing Mechanism on the Harmony module in a similar fashion to the Japanese H-II Transfer Vehicle and the retired SpaceX Dragon, but not the other active American CRS Dragon 2 vehicle, which docks autonomously. For typical missions, Cygnus is planned to remain berthed for about 30 days. Unlike Dragon 2 and the earlier Dragon, Cygnus does not provide cargo return capability. However, it can be loaded with obsolete equipment and trash for destructive reentry similar to the Russian Progress vehicles.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: ESP-2 was detached from its Keel Yoke Assembly (which remained in the Orbiter) and installed with the assistance of Space Shuttle Discovery's robotic arm and two spacewalkers during the STS-114 mission. It is much larger than ESP-1 with eight FRAM sites creating room for up to eight spare parts (ORUs). Like ESP-1, it is powered by the Unity Module. However, unlike ESP-1, ESP-2 is attached to the Quest Joint Airlock using a specialized ESP Attachment Device (ESPAD). ESP-2 and ESP-3 are deployable versions of the integrated cargo carrier and have the same dimensions, approximately 8.5 feet (2.6 m) long and 14 feet (4.3 m) wide.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The complexity of an integrated circuit is bounded by physical limitations on the number of transistors that can be put onto one chip, the number of package terminations that can connect the processor to other parts of the system, the number of interconnections it is possible to make on the chip, and the heat that the chip can dissipate. Advancing technology makes more complex and powerful chips feasible to manufacture. A minimal hypothetical microprocessor might include only an arithmetic logic unit (ALU), and a control logic section. The ALU performs addition, subtraction, and operations such as AND or OR. Each operation of the ALU sets one or more flags in a status register, which indicate the results of the last operation (zero value, negative number, overflow, or others). The control logic retrieves instruction codes from memory and initiates the sequence of operations required for the ALU to carry out the instruction. A single operation code might affect many individual data paths, registers, and other elements of the processor.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The two versions were very similar, 80 percent of their components being the same. The Centaur G-Prime stage had two RL10-3-3A engines, each with 73,400 newtons (16,500 lbf) thrust, and a specific impulse of 446.4 seconds, with a 5:1 fuel ratio. The Centaur G stage had two RL10-3-3B engines, each with 66,700 newtons (15,000 lbf) thrust, and specific impulse of 440.4 seconds, with a 6:1 fuel ratio. The engines were capable of multiple restarts after long periods of coasting in space and had a hydraulic gimbal actuation system powered by the turbopump. The Centaur G and G-Prime avionics were the same as that of the standard Centaur and were still mounted in the forward equipment module. They used a 24-bit Teledyne Digital Computer Unit with 16 kilobytes of RAM to control guidance and navigation. They still used the same pressurized steel tank, but with more insulation including a two-layer foam blanket over the forward bulkhead and a three-layer radiation shield. Other changes included new forward and aft adapters; a new propellant fill, drain and dump system; and an S band transmitter and RF system compatible with the TDRS system.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Each of the Solar Array Wings are 34 m (112 ft) long by 12 m (39 ft) wide, have roughly 1,100 kg (2,400 lb) of mass, and are capable of generating nearly 30 kW of DC power. They are split into two photovoltaic blankets, with the deployment mast in between. Each blanket has 16,400 silicon photovoltaic cells, each cell measuring 8 cm x 8 cm, grouped into 82 active panels, each consisting of 200 cells, with 4,100 diodes.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The type known as a thermionic tube or thermionic valve utilizes thermionic emission of electrons from a hot cathode for fundamental electronic functions such as signal amplification and current rectification. Non-thermionic types such as a vacuum phototube, however, achieve electron emission through the photoelectric effect, and are used for such purposes as the detection of light intensities. In both types, the electrons are accelerated from the cathode to the anode by the electric field in the tube.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The thermionic triode, a vacuum tube invented in 1907, enabled amplified radio technology and long-distance telephony. The triode, however, was a fragile device that consumed a substantial amount of power. In 1909, physicist William Eccles discovered the crystal diode oscillator. Physicist Julius Edgar Lilienfeld filed a patent for a field-effect transistor (FET) in Canada in 1925, which was intended to be a solid-state replacement for the triode. Lilienfeld also filed identical patents in the United States in 1926 and 1928. However, Lilienfeld did not publish any research articles about his devices nor did his patents cite any specific examples of a working prototype. Because the production of high-quality semiconductor materials was still decades away, Lilienfeld's solid-state amplifier ideas would not have found practical use in the 1920s and 1930s, even if such a device had been built. In 1934, inventor Oskar Heil patented a similar device in Europe.
  • Using base image: Yes

For sale

• Model: Artistic

• Size: 672 X 864 (0.58 MP)

• Used settings:

  • Prompt: Daniel Merriam style. A white intricate luxurious building over a waterfall. Intricate, hyper realistic, elaborate, extremely detailed
  • Using base image: Yes

Googie architecture in the bush

• Model: Artistic

• Size: 864 X 672 (0.58 MP)

• Used settings:

  • Prompt: Googie architecture
  • Using base image: Yes

Fairy Village

• Model: Artistic

• Size: 928 X 608 (0.56 MP)

• Used settings:

  • Prompt: Fairy homes in a magical forest, illuminated windows, woodland grove, mystical trees, water, fairy lights
  • Using base image: Yes

Fairy Village in the Woods

• Model: Artistic

• Size: 928 X 608 (0.56 MP)

• Used settings:

  • Prompt: Fairy homes in a magical forest, illuminated windows, woodland grove, mystical trees, water, fairy lights
  • Using base image: Yes

City Portal

• Model: Artistic

• Size: 1155 X 908 (1.05 MP)

• Used settings:

  • Prompt: And then, dot, dot, dot...
  • Using base image: No
  • Aspect Ratio: landscape

Red House

• Model: Stable

• Size: 896 X 704 (0.63 MP)

• Used settings:

  • Prompt: Three-story house built with red brick, with a balcony on the upper floor and a restaurant on the ground floor
  • Using base image: No
  • Aspect Ratio: landscape

Biomorphic Architecture

• Model: Artistic

• Size: 1155 X 908 (1.05 MP)

• Used settings:

  • Prompt: Biomorphic Nature Gravity-Defying Architecture
  • Using base image: No
  • Aspect Ratio: landscape

Googie architecture

• Model: Artistic

• Size: 864 X 672 (0.58 MP)

• Used settings:

  • Prompt: Googie architecture
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Crew Dragon has eight side-mounted SuperDraco engines, clustered in redundant pairs in four engine pods, with each engine able to produce 71 kN (16,000 lbf) of thrust to be used for launch aborts. Each pod also contains four Draco thrusters that can be used for attitude control and orbital maneuvers. The SuperDraco engine combustion chamber is printed of Inconel, an alloy of nickel and iron, using a process of direct metal laser sintering. Engines are contained in a protective nacelle to prevent fault propagation if an engine fails. Once in orbit, Dragon 2 is able to autonomously dock to the ISS. Dragon 1 was berthed using the Canadarm2 robotic arm, requiring substantially more involvement from ISS crew. Pilots of Crew Dragon retain the ability to dock the spacecraft using manual controls interfaced with a static tablet-like computer. The spacecraft can be operated in full vacuum, and "the crew will wear SpaceX-designed space suits to protect them from a rapid cabin depressurization emergency event". Also, the spacecraft will be able to return safely if a leak occurs "of up to an equivalent orifice of 6.35 mm [0.25 in] in diameter".
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: The laboratory is a cylindrical module, made from stainless steel, kevlar and hardened aluminum, with two end cones. It is 4.477 m (14 ft 8.3 in) in external diameter and 6.871 m (22 ft 6.5 in) in overall length, excluding the projecting external experiment racks. Its shape is very similar to that of the Multi-Purpose Logistics Modules (MPLMs), since both were designed to fit in the cargo bay of a Space Shuttle orbiter. The starboard end cone contains most of the laboratory's on-board computers. The port end cone contains the Common Berthing Mechanism.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Fluorescent imaging techniques, as well as electron microscopy, x-ray crystallography, NMR spectroscopy, atomic force microscopy (AFM) and small-angle scattering (SAS) both with X-rays and neutrons (SAXS/SANS) are often used to visualize structures of biological significance. Protein dynamics can be observed by neutron spin echo spectroscopy. Conformational change in structure can be measured using techniques such as dual polarisation interferometry, circular dichroism, SAXS and SANS. Direct manipulation of molecules using optical tweezers or AFM, can also be used to monitor biological events where forces and distances are at the nanoscale. Molecular biophysicists often consider complex biological events as systems of interacting entities which can be understood e.g. through statistical mechanics, thermodynamics and chemical kinetics. By drawing knowledge and experimental techniques from a wide variety of disciplines, biophysicists are often able to directly observe, model or even manipulate the structures and interactions of individual molecules or complexes of molecules.
  • Using base image: Yes

Ukraine, Kotsiubiiv, Kotsiubiiv O & B Theatre

• Model: Artistic

• Size: 1024 X 576 (0.59 MP)

• Used settings:

  • Prompt: Biotechnology and biochemical engineering are closely related to each other as biochemical engineering can be considered a sub-branch of biotechnology. One of the primary focuses of biotechnology is in the medical field, where biochemical engineers work to design pharmaceuticals, artificial organs, biomedical devices, chemical sensors, and drug delivery systems. Biochemical engineers use their knowledge of chemical processes in biological systems in order to create tangible products that improve people's health. Specific areas of studies include metabolic, enzyme, and tissue engineering. The study of cell cultures is widely used in biochemical engineering and biotechnology due to its many applications in developing natural fuels, improving the efficiency in producing drugs and pharmaceutical processes, and also creating cures for disease. Other medical applications of biochemical engineering within biotechnology are genetics testing and pharmacogenomics.
  • Using base image: Yes